Savage 112 series j stock

[bigbil70]

I have just purchased a Savage model 112r series j will the savage 10/12 stock fit it?

Thanksgun)

 

[MachV]

First off welcome to LRH its a great place to read up on this stuff...
The quick answer to your question is No "Not without a lot of work" Measure the distance between you action screws and you will know.
A Savage 112 is a long action=5.00
Most J actions are mid actions=4.53
A Savage 10/12 is a short action=4.3?
You can see in the pic the difference in the screw spaceing the action requires.
Top is 112/long , middle is a J/mid and bottom is a 10/11/12/short

 

[geargrinder]

You'll have to measure the screw spacing. Just because it is a "J" doesn't mean it is an intermediate action.

It could be a regular long action.

What caliber is it?

 

[bigbil70]

Thanks. And it is a 22-250 with a bull barrel boyds only had the 10/12 in bull barrel and the 110 in factory. ive looked and it wont fit the 110

 

[geargrinder]

Are you sure it is a bull? Many had a target contour barrel that was similar to a varmint contour.

Here's a link to boyds intermediate stock with barrel inlet dimensions.

CLASSIC SAVAGE 110 INTERMEDIATE ACTION TAPERED BARREL CHANNEL NUTMEG LAMINATE (SEMI-INLET)

 

[bigbil70]

Thank you its a target not a bull. so it will work thanks