Sako - GRS - Stock Lengthen Inlet

Discussion in 'Gunsmithing' started by kwe182, Jul 26, 2018.

  1. kwe182

    kwe182 Well-Known Member

    Messages:
    157
    Joined:
    Nov 3, 2013
    I was wondering if anyone has had this done, or recommend a gunsmith that could do this for me.

    below is a response from GRS.

    Ken,
    Thanks for your e-mail and interest in GRS.
    Unfortunately, we do not inlet for the action of your 300 WSM. This is what Sako calls the SM action.
    You can purchase a 75 III action and lengthen the inlet 12mm. If you decide to do this the part number is in the attached link.
    https://www.eurooptic.com/GRS-Hunter-Sako-75-III-Brown-103716.aspx
    Sorry, we don't have the inlet you need.
    Best Regards,

    Jerry Davenport
    US Key Account Manager
    GRS RIFLESTOCKS AS
     
  2. ShtrRdy

    ShtrRdy Well-Known Member

    Messages:
    1,264
    Joined:
    Jan 14, 2012
  3. Canhunter35

    Canhunter35 Well-Known Member

    Messages:
    1,429
    Joined:
    Jun 13, 2017
    Not sure if this helps but My cousin ordered a stock inletted for a sako l61r for his sako av which has a .5” longer tang. In letting it a little more followed by bedding worked well
     
  4. kwe182

    kwe182 Well-Known Member

    Messages:
    157
    Joined:
    Nov 3, 2013
    Sent him an email, we’ll see what he can do.

    I’ll let you know what I end up doing.
     
  5. FEENIX

    FEENIX Well-Known Member

    Messages:
    11,010
    Joined:
    Dec 20, 2008
  6. kwe182

    kwe182 Well-Known Member

    Messages:
    157
    Joined:
    Nov 3, 2013
    Thank you, Feenix, I sent him an email thru his website