Ring height

rickdavis81

Well-Known Member
Joined
Jul 30, 2009
Messages
217
Location
SW Missouri
Going to order a Burris XTR II 4-20x50 for my sps tactical. I have a 20 moa base already attached. I like the Burris XTR rings but looks like the only make a medium height in 34mm. Is that low enough or do I need to look elsewhere for rings?
 
Going to order a Burris XTR II 4-20x50 for my sps tactical. I have a 20 moa base already attached. I like the Burris XTR rings but looks like the only make a medium height in 34mm. Is that low enough or do I need to look elsewhere for rings?

If you look at their chart the 34MM item 420210 and 30MM (low) item 420221 has the same 1.00" height.

dRi1XCj.png


xUSAUOt.png


I have the 1.50" height on mine with slightly over 1/4" of barrel clearance but it works for me because I have an adjustable cheek piece and no problem with my sight height.

 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top