RESETTING ZERO STOP ON NX8

[Ashlo84]

Hello all!
I bought a NX8 last year and zeroed it. I recently added a suppressor to thay setup and my load was approximately 2.25 moa low. I can't seem to find any information on resetting the zero.
I don't know what I'm missing here, should be fairly simple thanks in advance for any help.

 

[Rick Richard]

There is a tutorial on YouTube if you search "setting zero stop on NF NX8.

 

[Ashlo84]

There is a tutorial on YouTube if you search "setting zero stop on NF NX8.

Is it for resetting it once its set once or is it just how to set it after unboxing? I believe its different.

 

[Rick Richard]

Is it for resetting it once its set once or is it just how to set it after unboxing? I believe its different.

I don't think it matters. I have reset my a couple of times and don't remember having to do anything different.

 

[8andbait]

Take turret off
Loosen 4 small screws on clutch assembly
Turn clutch desired direction
Tighten the 4 screws
Put turret back on and tighten those screws.

 

[Ashlo84]

Take turret off
Loosen 4 small screws on clutch assembly
Turn clutch desired direction
Tighten the 4 screws
Put turret back on and tighten those screws.

Ok I think I was completely over thinking this. I now realize by loosening those four set screws your essentially giving yourself room to play with the clutch mechanism. Thank you for putting up with my ignorance.

 

[deadidarren]

Just don't tighten them any more than 4 inch pounds

 

[Jeffrey Van Zandt]

 

[lancetkenyon]

If you are now hitting low (which is totally understandable with a new suppressor hanging on the end of the barrel), dial up and shoot until you get your POI zero where you want it again.

THEN, do this as @8andbait detailed:

Take turret off
Loosen 4 small screws on clutch assembly
Turn clutch desired direction
Tighten the 4 screws
Put turret back on at zero and tighten those screws.

 

[Ashlo84]

Thanks for the replies. Once I got home from work I looked at it and made sense of the mechanism. I just wasnt tracking on how the clutch system worked. I got it set now! Should be good to go once I get back out to the range! Thanks everyone.