I've got a Manners EH1 that has custom paint work done and I'd like to be able to remove all of the paint without damaging the stock. Any ideas?
REMOVING PAINT FROM MANNERS EH1
- Thread starter PRCLITE
- Start date
Help Support Long Range Hunting Forum
Wet Sand with a fine grit paper like 400 or 600 grit
Much appreciated! I'm guessing once I get down to the original molded finish I should be using something even finer at that point?
Are you trying to save the original finish or reconstruct it? If trying to save the original finish, I would go down to 1000 grit and then polish or buff it.
Krylon
Actually no I'm not too worried about saving the original finish, just prep it for more paint work.
600 grit wet sand repaint.
Thanks!
lancetkenyon
Well-Known Member
Paint stripper will take spray paint off very well.
I agree with that and it might be the easiest method but I was concerned with messing up the carbon fiber shell.
MagMan
Well-Known Member
Spray can of "Grafitti Remover". Did that wit an HS stock and krylon. It all came off. Might need a toothbrush.
lancetkenyon
Well-Known Member
I have done several Manners CF stocks like this. No issues.
