Runnin N Gunnin
Well-Known Member
This is a fully built 7mm SAUM on a Remington 700 short action that was built by Long Range Inc. This gun has never been fired. It has a Bartlein #4, 1:8 heavy spiral fluted barrel at 26". It's approximately 27 3/16" with brake. The barrel was fluted by Kampfeld Customs. All the gunsmithing work was done at LRI including the cerakote which matches the stock. Everything was color matched, talley low rings, bottom metal and screws. This rifle has a timney 510 trigger at 2.75 LBS. Manners EH1A stock with flush cups on the left side in GAP camo, M5 inlet, Seekins SRS 2.5" rail and one 3 round double stack detachable magazine. I'm selling this due to owning another 7 SAUM that I got too good of a deal to pass up, so this one goes. I mounted a Nightforce NXS 5.5-22x50 (C433) MOAR reticle, illuminated, zero stop scope on this rifle. This rifle can be sold with or without the scope. None of the components or scope will be sold/traded before the sale of the rifle. This rifle weighs 10 lb. 12 oz. with the Nightforce mounted ready to go. Rifle and rings it weighs 8 lb. 12 oz. This rifle will be shipped from my FFL to your FFL, unless you are able to meet at local FFL.
I can include a full length RCBS sizing and seating die set with a Redding body die. Your choice of 50 pieces of new ADG brass, or 50 pieces of new Norma Brass or 75 pieces of new Nosler brass. Also, your choice of a box of Berger 168 VLD-H, one to two boxes of Berger 180 Hybrids or up to five boxes of Barnes 168 LRX. I also have an opened box of Hornady 175 ELD-X if that interest you.
I have a Manners EH1 stock in what I'm told as a custom desert camo and color matched Badger M5 bottom metal that could be swapped although the cerakote would not match the stock, but would save 1/2 pound of weight or so. This would come with two accurate single stack 5 round mags. I can include pictures if this is a better option for you. I have a Timney two stage trigger and a Jard trigger if any of these combos work better.
Rifle with talley rings- $ 2750
Rifle and components- $ 2950
Rifle, components and scope- $4250
Will split actual shipping with the buyer
I can include a full length RCBS sizing and seating die set with a Redding body die. Your choice of 50 pieces of new ADG brass, or 50 pieces of new Norma Brass or 75 pieces of new Nosler brass. Also, your choice of a box of Berger 168 VLD-H, one to two boxes of Berger 180 Hybrids or up to five boxes of Barnes 168 LRX. I also have an opened box of Hornady 175 ELD-X if that interest you.
I have a Manners EH1 stock in what I'm told as a custom desert camo and color matched Badger M5 bottom metal that could be swapped although the cerakote would not match the stock, but would save 1/2 pound of weight or so. This would come with two accurate single stack 5 round mags. I can include pictures if this is a better option for you. I have a Timney two stage trigger and a Jard trigger if any of these combos work better.
Rifle with talley rings- $ 2750
Rifle and components- $ 2950
Rifle, components and scope- $4250
Will split actual shipping with the buyer
Attachments
Last edited:
