For Sale:
I'd like to sell all (3) parts together as a gun, but as we know...guys on these forums like parts better...so...
(1) Rem 700 Stainless 300 RUM action (rt hand), with a Timney Calvin Elite Trigger, and a Nightforce 20 MOA Rail, the factory action has NOT been squared up
(1) Rem 700 - 26" 300 RUM Sendero take off barrel with approx 200 rounds on it
(1) McMillan A-5 stock with adjustable cheek piece and stock inserts, grey with black speckles, comes with a Gen 1 Seekins 3.715" DBM / 5 round 300 WM mag
I bought this as a complete Rem 700 300 RUM sendero in 2014
The action and barrel have less than 200 rounds on them
I bought the stock used, when I didn't know much about the various DBM's out there...
The stock is a used McMillan A-5, I have a 15 1/2" LOP, so just tell me your length of pull and I will pull some spacers out
The 3.715" DBM is a Gen 1 Seekins DBM. (This is NOT a M5 bottom metal) The Gen 1 Seekins has it's own DBM opening that is a little smaller than an M5.
So yes you could have the DBM opening turned into a M5, for CIP DBM (3.850"), but that would cost yout to have that done somewhere.
The previous owner opened up the barrel channel to 1.25".
And he opened the action area up to re-bed it...
Why, I do not know....So I re-bed the ACTION only. And NO the bedding does NOT look perfect like Piercision's did it...
The recoil lug has not been bedded yet. Why? Because I was going to do this when I turned this action/stock into a 300 WSM long action...that never happened
If you want all of the components as an entire gun, I will then bed the lug area. If you don't want the entire package, the stock will be sold with the recoil lug UNBEDDED...meaning you will have to bed it to the action/lug you put into it
$1800 shipped (postal money orders only) for the action, barrel, and stock from my FFL to your FFL.
I will keep this together for a week or so...
If it doesn't sell together, I will sell the parts for the following
$825 shipped (postal money order only) from my FFL to your FFL, for the 300 RUM action, Nightforce rail, and the Timney CE trigger (I will not part the action/trigger/rail out)
$825 shipped (postal money order only) for the McMillan stock, Seekins Gen 1- 3.715" DBM and (1) 3.715" 5-round AI mag
$200 shipped (postal money order only) for the 300 RUM Sendero barrel
Remember, I want to try to sell this as a kit until 1-28-2022
If it doesn't sell together, then I will sell it as parts,
time stamped I'll take it" gets it first
Thanks
I'd like to sell all (3) parts together as a gun, but as we know...guys on these forums like parts better...so...
(1) Rem 700 Stainless 300 RUM action (rt hand), with a Timney Calvin Elite Trigger, and a Nightforce 20 MOA Rail, the factory action has NOT been squared up
(1) Rem 700 - 26" 300 RUM Sendero take off barrel with approx 200 rounds on it
(1) McMillan A-5 stock with adjustable cheek piece and stock inserts, grey with black speckles, comes with a Gen 1 Seekins 3.715" DBM / 5 round 300 WM mag
I bought this as a complete Rem 700 300 RUM sendero in 2014
The action and barrel have less than 200 rounds on them
I bought the stock used, when I didn't know much about the various DBM's out there...
The stock is a used McMillan A-5, I have a 15 1/2" LOP, so just tell me your length of pull and I will pull some spacers out
The 3.715" DBM is a Gen 1 Seekins DBM. (This is NOT a M5 bottom metal) The Gen 1 Seekins has it's own DBM opening that is a little smaller than an M5.
So yes you could have the DBM opening turned into a M5, for CIP DBM (3.850"), but that would cost yout to have that done somewhere.
The previous owner opened up the barrel channel to 1.25".
And he opened the action area up to re-bed it...
Why, I do not know....So I re-bed the ACTION only. And NO the bedding does NOT look perfect like Piercision's did it...
The recoil lug has not been bedded yet. Why? Because I was going to do this when I turned this action/stock into a 300 WSM long action...that never happened
If you want all of the components as an entire gun, I will then bed the lug area. If you don't want the entire package, the stock will be sold with the recoil lug UNBEDDED...meaning you will have to bed it to the action/lug you put into it
$1800 shipped (postal money orders only) for the action, barrel, and stock from my FFL to your FFL.
I will keep this together for a week or so...
If it doesn't sell together, I will sell the parts for the following
$825 shipped (postal money order only) from my FFL to your FFL, for the 300 RUM action, Nightforce rail, and the Timney CE trigger (I will not part the action/trigger/rail out)
$825 shipped (postal money order only) for the McMillan stock, Seekins Gen 1- 3.715" DBM and (1) 3.715" 5-round AI mag
$200 shipped (postal money order only) for the 300 RUM Sendero barrel
Remember, I want to try to sell this as a kit until 1-28-2022
If it doesn't sell together, then I will sell it as parts,
time stamped I'll take it" gets it first
Thanks
Last edited:
