Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading 338 lapua
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="coyote338" data-source="post: 757876" data-attributes="member: 61522"><p>hi guys, thanks for the responses.</p><p></p><p>so here is what i am doing:</p><p></p><p>i used the 550 to neck size the brass (lapua), and seat the primer (Federal 215).</p><p></p><p>i then remove the primed brass, and put it on a scale and set it to zero, and put the primed brass back into the press, and load the powder.</p><p></p><p>i then remove the brass with the powder loaded and weigh (i want it between 94-95 if its not i throw the powder back and do it again), i then write the charge weight on the side of the brass with a magic marker.</p><p></p><p>then i put a 250gr lapua senar into it and seat it so that the entire round sits at ABOUT 3.65 to 3.652</p><p></p><p>i write the seating depth on the brass as well</p><p></p><p></p><p>and that is how they say...that.</p><p></p><p></p><p>please tell me how you feel about my charge/ seating depth</p><p></p><p>i feel like i might be over doing it by 1-2 grains on the charge.</p></blockquote><p></p>
[QUOTE="coyote338, post: 757876, member: 61522"] hi guys, thanks for the responses. so here is what i am doing: i used the 550 to neck size the brass (lapua), and seat the primer (Federal 215). i then remove the primed brass, and put it on a scale and set it to zero, and put the primed brass back into the press, and load the powder. i then remove the brass with the powder loaded and weigh (i want it between 94-95 if its not i throw the powder back and do it again), i then write the charge weight on the side of the brass with a magic marker. then i put a 250gr lapua senar into it and seat it so that the entire round sits at ABOUT 3.65 to 3.652 i write the seating depth on the brass as well and that is how they say...that. please tell me how you feel about my charge/ seating depth i feel like i might be over doing it by 1-2 grains on the charge. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading 338 lapua
Top