Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Redding Competition Shellholders
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Bitis Arietans" data-source="post: 1468063" data-attributes="member: 100628"><p>Good Day, All</p><p>I've pick up the Redding Competition Shell Holders Set. Loading for 7MM Rem Mag (Sako 85 Finnlight)</p><p>I'm trying to minimize should bump (to .002", or so) As I understand it the .010 holder (.010" deeper, than the standard shell holders, that are usually .0.125") will allow the case to travel into the Sizing die (Redding Type S) less, and reduce the shoulder bump.</p><p></p><p>The instructions with the new holders recommend that you start by using the deepest holder (.010"0 first; size the case and attempt to chamber the cartridge. If it wont chamber, or chambers with difficulty...use the .008 and so on.</p><p></p><p>Surprisingly, after sizing with the .010 holder the round still chambers! It's like I need a holder that's even deeper! I have set the die in the press so it touches the press's ram firmly (w/ a little cam-over)</p><p></p><p>I've tried contacting Redding, but sadly they are unavailable due to inventory work.</p><p>Thoughts...</p><p></p><p>Thanks much, as usual</p></blockquote><p></p>
[QUOTE="Bitis Arietans, post: 1468063, member: 100628"] Good Day, All I've pick up the Redding Competition Shell Holders Set. Loading for 7MM Rem Mag (Sako 85 Finnlight) I'm trying to minimize should bump (to .002", or so) As I understand it the .010 holder (.010" deeper, than the standard shell holders, that are usually .0.125") will allow the case to travel into the Sizing die (Redding Type S) less, and reduce the shoulder bump. The instructions with the new holders recommend that you start by using the deepest holder (.010"0 first; size the case and attempt to chamber the cartridge. If it wont chamber, or chambers with difficulty...use the .008 and so on. Surprisingly, after sizing with the .010 holder the round still chambers! It's like I need a holder that's even deeper! I have set the die in the press so it touches the press's ram firmly (w/ a little cam-over) I've tried contacting Redding, but sadly they are unavailable due to inventory work. Thoughts... Thanks much, as usual [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Redding Competition Shellholders
Top