SOLD/EXPIRED R700 Manners Hart Jewell Near 338 Edge

Discussion in 'Sold/Expired' started by Autorotate, Feb 2, 2013.

Thread Status:
Not open for further replies.
  1. Autorotate

    Autorotate Well-Known Member

    Messages:
    514
    Joined:
    Apr 2, 2007
    This rifle started life as a 300 RUM Sendero I bought new.

    It now stands as it's spec'd below.

    R700 Stainless Sendero action Level 2B accurized and pillar bedded by Score High
    Manners T3
    2 flush cups
    PTG BDL steel bottom metal
    Wyatt CFE-9 center feed mag box (4.090 COAL)
    PTG Firing Pin Assembly
    KMW bolt knob
    Hart 1000 yd contour 1:10 twist fluted 29.5" from bolt face to muzzle crown
    Holland QD Radial Muzzle Brake
    Near Mfg 25 MOA base skim bedded with Devcon 10110
    All metal cerakoted
    Jewell top safety trigger set at 1#
    ZERO round count
    Bipod not included

    All smith work done by Charley Robertson at Score High Gunsmithing. For those that don't know...Charley and his work will go down as legendary in the industry. A very knowledgable and exacting smith....one I hold in the highest regard.

    This rifle will just squeeze into a trailmax scabbard for your horse/atv hunts. With a NXS and a harris bipod it will be right at 14.5 lbs.

    If your a discriminating buyer, I have a removable pilot finish reamer from PTG available to go with the rifle, and can email you the print. I made the dummy round to put the big 300 grainers at maximum working COAL with the big Wyatt box, with the boat tail bearing surface junction of the bullet lining up with the case neck/shoulder junction. And I ask Dave to ensure a no turn chamber neck spec of .002 to .0025 radial or .004 to .005 total neck wall clearance, so you get the best of precision/field reliability/case life. In my experience, that's the spec you want.

    So basically, this is a perfect rig for someone to walk right into LR/ELR...with the hard thought and wait time already beat out of it. It is retarded for me to sell, but I just don't have the time I used too....haven't shot the rifle, and so this is for sale. It won't be given away.

    $2700 shipped to your FFL.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. Broz

    Broz Well-Known Member

    Messages:
    8,638
    Joined:
    Feb 3, 2007
    This is a great deal. Don't wait to long guys or I may have to own this. I can't believe it has lasted this long. What a hammer, all top end parts, and done right.

    PS: Buy with confidence Autorotate is 100% good to deal with.

    Jeff
     
  3. Broz

    Broz Well-Known Member

    Messages:
    8,638
    Joined:
    Feb 3, 2007
    PM sent!!:D
     
  4. bubba41

    bubba41 Well-Known Member

    Messages:
    333
    Joined:
    Feb 16, 2011
    is this still for sale
     
  5. Broz

    Broz Well-Known Member

    Messages:
    8,638
    Joined:
    Feb 3, 2007
    As per our phone conversation I will take it.

    Thank you!

    Jeff
     
  6. Autorotate

    Autorotate Well-Known Member

    Messages:
    514
    Joined:
    Apr 2, 2007
    Couldn't have thought of a better fella to sell it too! gun)

    Thread closed.
     
Thread Status:
Not open for further replies.