Question about 338. Lapua

CoyoteKid

Member
Joined
Oct 25, 2004
Messages
11
Location
Oklahoma
My friends dad has a .338Lapua.My friend says it dang near broke his dads collar bone. I was wondering how hard a .338Lapua kicks in comparison to a .30-06, and if Lapua is the gun manufacturer or part of the caliber.


Thanks, CoyoteKid
 
In a 9# gun, a 180g going 2700 in front of 50g of powder has about 18 ft lb going about 12fps. Same gun, a 250g going 3000 fps in front of - what? - 110g of powder, will kick back over 56 ft lb at 20 fps.
Big difference.
Give yourself a 27# 338 and it'll be about the same as the '06.
wink.gif
 
I have a Ga Precision Bult .338 Lapua, loads with 87 grains of reloader 25..with 300 grain SMK's
I know semi light load but with a 27" Tube and a badger break ...I'm not kidding the thing recoiled like a weak .308 or a .243 it was more of a push then a sharp snap ...I even shot some of the so called dreaded Blach Hills with 300 SMK's and it was like a 30-06 ..the whole rifle weights 15.4 lbs

TacKac Out
grin.gif
eqd1u
 
Warning! This thread is more than 20 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top