PTG MAG EXTRACTOR FOR PTG BOLT

[Farmerbrown32]

looking for a PTG 300win mag/ ultra mag extractor for my ptg bolt. Cant find one in stock anywhere.
Thanks

 

[Farmerbrown32]

Still looking!

 

[Farmerbrown32]

Up top, really need one!

 

[Joel Russo]

If your bolt accepts a mini M16 extractor, I can sell you an extractor, spring, and roll pin for $35.00 shipped.
Contact me for payment info if your interested.
We make our own, and I literally have hundreds in stock.

 

[Farmerbrown32]

Honestly i dont know if its the mini. I think it is the full size m16. Here is a pic. But if it is a mini then yes i will take one.

 

[Joel Russo]

Put a dial caliper to the width and tell me what it measures.

 

[Farmerbrown32]

Put a dial caliper to the width and tell me what it measures.

The opening measures .258

 

[Joel Russo]

The opening measures .258

That's a standard extractor and not the mini. I would suggest you contact Badger direct, as they were the ones that originally designed the extractor, and they do have them in stock.

 

[Farmerbrown32]

I thought about doing that, its just i have seen where some people say that the ptg extractor are the only ones that work right with the ptg bolt. Have you seen this or would the badger work fine?

 

[Joel Russo]

I'm not sure about that. What I am sure about is that the PTG extractors are junk. And I back that up with proof. We contemplated using them on our actions until we used an optical comparator to measure the tolerances across the board on 10 extractors. They were all over the place... complete junk.
That's why we make our own.

I would buy one from Badger, and see if it works. I'm fairly certain PTG reverse engineered the Badger.....

 

[Farmerbrown32]

Cool, got a badger ordered. Thank you very much for your help!

 

[Joel Russo]

If for any reason the Badger doesn't work, I'll dig up a PTG and send it to you no charge. I should have a full size one here somewhere..

 

[Farmerbrown32]

Awesome, thanks alot sir!