Powder handling after pulling bullets

[MT257]

I will be pulling some bullets in the next week or so 7mm RM. My question is- how can I best store that powder currently in the cases? Does it need to be stored in a plastic container or can it be temporarily stored in a sealed glass container? I no longer have the original plastic jug it came out of. This will be in a climate controlled room.
Thanks

 

[GLTaylor]

Air tight is the main concern. Jar is fine. Just be sure to label it and not mix with other powder.

 

[MT257]

Air tight is the main concern. Jar is fine. Just be sure to label it and not mix with other powder.

Air tight it will be. Just wanted to double check that it wouldnt have any sort of side effects by sitting in a sealed jar.

 

[QuietTexan]

I'd clean the container out with alcohol first, to remove any oily residual in it from whatever was in there before. Get the high proof 99% isopropanol stuff from the first aid section, not the 70% stuff.

 

[Savage 12BVSS]

You should be fine just keep it dry.

 

[MT257]

Thanks guys, cleaned a jar with alcohol, let it dry and gave it a snug twist on the jar lid.