Powder funnel for 300 WSM ???

LoneTraveler

Well-Known Member
Joined
Feb 7, 2014
Messages
777
I first time I reloaded 300 WSM was about 2004. Every funnel I had would not seat the neck in funnel against the bevel. Powder fell on the loading block when I removed the funnel. Dump the powder and start over.

I took one of my plastic funnels and drilled the hole in the funnel bevel out to I believe 9/16". Till the shoulder cleared the funnel and the neck contacted the bevel proper. Have had no problem since.
 

Scythe

Well-Known Member
LRH Team Member
Joined
Apr 5, 2021
Messages
59
Location
Eastern Ohio
I have the Area 419 funnel with drop tube and funnel heads in 7mm and 338. Very nice gear. Zero static problems. If you want to pay the extra for something that you could pass on because it will last this would be my suggestion.
 

Equalizer

Well-Known Member
Joined
Sep 19, 2019
Messages
231
Location
Gods country
I have the Redding universal funnel. I cut about a half inch off the top of a 223 case. The “spacer” goes into the case mouth & the funnel sits on top of it. Viola. Works for 6.5 & 300 Saum.
 

Dentite

Active Member
Joined
Oct 22, 2014
Messages
39
The extreme hard-core gear aluminum funnels work great for me and the 308 diameter one works great for my 300WSM cases.
 

Equalizer

Well-Known Member
Joined
Sep 19, 2019
Messages
231
Location
Gods country
Im using the Redding for 22 hornet through 375 H & H. Zero trouble after I made the spacer to deal with the short Mag geometry.

Said spacer…


2EF460E5-4BF6-439A-979E-FA0DE68F4B5E.jpeg
A8B96C1B-9A6C-40A4-9218-457515E6D271.jpeg
BC4BF4C9-7400-4CFE-900E-A29CECBA41DC.jpeg
DE2D5FDE-A0CB-4AC8-B299-60DADBEC6558.jpeg
 
Top