Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Powder charge for 7mm Remington Magnum using 168 vld
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="moombaskier" data-source="post: 356387" data-attributes="member: 7841"><p>I worked up a load using Retumbo, 168vld, Win. brass.and Fed. 215M's. I started at 69.0grs. and stopped at 72.5grs. 71.5 worked best at 3050fps. I wasn't satisfied with the velocity spread, ES was 30. I ended up using 72.0grs. of H1000...same components and came up with 3025fps with an ES of 5. The H1000 also burns a lot cleaner in my 7mm Rem. Mag than Retumbo. My bullets are seated .010" from the lands. Good luck and load safely.</p></blockquote><p></p>
[QUOTE="moombaskier, post: 356387, member: 7841"] I worked up a load using Retumbo, 168vld, Win. brass.and Fed. 215M's. I started at 69.0grs. and stopped at 72.5grs. 71.5 worked best at 3050fps. I wasn't satisfied with the velocity spread, ES was 30. I ended up using 72.0grs. of H1000...same components and came up with 3025fps with an ES of 5. The H1000 also burns a lot cleaner in my 7mm Rem. Mag than Retumbo. My bullets are seated .010" from the lands. Good luck and load safely. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Powder charge for 7mm Remington Magnum using 168 vld
Top