Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
PMAG Mods for 300wsm
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="TexSavage" data-source="post: 1444938" data-attributes="member: 6245"><p>I appreciate both of the replies. I have seen someone using a dowel rod with emery cloth on it and did a little sanding on the front thickened portion of the magazine to get just a few more thousands to accommodate a minutely longer COAL. I have tested my load and dropped it down to 2.950 from 3.015 and saw no change in group size, pressure or velocity. So I think I have a little wiggle room in my coal if need be. The 215 Berger Hybrid has not been finicky one bit as far as being off the lands at a precise point.</p><p></p><p>I'll keep you posted once I get the magazine modified, which I will then get my bottom metal and have the stock insetted and bottom metal installed.</p></blockquote><p></p>
[QUOTE="TexSavage, post: 1444938, member: 6245"] I appreciate both of the replies. I have seen someone using a dowel rod with emery cloth on it and did a little sanding on the front thickened portion of the magazine to get just a few more thousands to accommodate a minutely longer COAL. I have tested my load and dropped it down to 2.950 from 3.015 and saw no change in group size, pressure or velocity. So I think I have a little wiggle room in my coal if need be. The 215 Berger Hybrid has not been finicky one bit as far as being off the lands at a precise point. I'll keep you posted once I get the magazine modified, which I will then get my bottom metal and have the stock insetted and bottom metal installed. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
PMAG Mods for 300wsm
Top