SOLD PENDING FUNDS
===============================================================================
I've updated this post since it was pointed out to me by several people that I had a couple of notable mistakes in my listing. I believe this listing is now correct. I have a ton of pics for this gun. I used the same pics for a Gunbroker listing. Seemed common since to share the same pics for this ad. View pics and decide the condition of rifle for yourself. I am A+ rated on Gunbroker ID: keppandrews
===============================================================================
FOR SALE: Piercision Rifle 300 Norma Magnum IMP/33
I was fortunate enough to have Ryan Pierce build me a very well-made rifle in 300 Norma Mag IMP/33. It was unfortunate that I found out how much I hate to fire form brass. I have fire formed 40 rounds in this gun and that's all it's been fired. I didn't have a hot enough load to fully fire form the shoulder so even those 40 cases need to be fire formed again. I just don't want to mess with it. Funny thing is that the gun fired several 5-shot groups just under MOA at 100 while fire forming. I love finding the perfect node with different powders, bullets seating depth. I don't like fire forming brass. The rifle is really awesome, but not so awesome for me.
SCOPE SPECIFICATIONS:
THIS IS NOT AN ATACR. IF I PREVIOUSLY DESCRIBED AS SUCH. I WAS WRONG. IT IS NOT AN ATACR. IT IS AN NXS
Mfg: Nightforce
Model: NXS - 5.5-22x56
Reticle: MOAR? I don't remember exactly which MOAR Reticle. I have a request with Nightforce support to see if they can identify the exact model by serial number.
Serial No: V07289
Made in Japan
Illumination: No
No Box.
No Papers.
PRICE WITH SCOPE AND RINGS: $5000
PRICE WITHOUT SCOPE AND RINGS $4000
Original receipt and pictures can be found here >>> CLICK HERE FOR PICS
I can provide you some level of purchase security for you by doing one of the following three actions.
Keller, TX
===============================================================================
I've updated this post since it was pointed out to me by several people that I had a couple of notable mistakes in my listing. I believe this listing is now correct. I have a ton of pics for this gun. I used the same pics for a Gunbroker listing. Seemed common since to share the same pics for this ad. View pics and decide the condition of rifle for yourself. I am A+ rated on Gunbroker ID: keppandrews
===============================================================================
FOR SALE: Piercision Rifle 300 Norma Magnum IMP/33
I was fortunate enough to have Ryan Pierce build me a very well-made rifle in 300 Norma Mag IMP/33. It was unfortunate that I found out how much I hate to fire form brass. I have fire formed 40 rounds in this gun and that's all it's been fired. I didn't have a hot enough load to fully fire form the shoulder so even those 40 cases need to be fire formed again. I just don't want to mess with it. Funny thing is that the gun fired several 5-shot groups just under MOA at 100 while fire forming. I love finding the perfect node with different powders, bullets seating depth. I don't like fire forming brass. The rifle is really awesome, but not so awesome for me.
| Kelbly Atlas Lapua Bolt Face | 1100 |
| Manners EH1 LA BDL 3 studs scorched camo | 600 |
| Proof Research Sendero Contour 26" 30 cal 9.0 tw | 730 |
| Titanium Self Timing 5 port 3/4x24 | 240 |
| Hawkins M5 BDL bottom metal | 180 |
| Wyatts CFE-12 Wyatts CFE -12 | 65 |
| Rem 700 Mag Spring Rem 700 Mag Spring | 15 |
| Hawkins Action Screws | 15 |
| Trigger Tech Special | 185 |
| Bullet Central 300 NMI sizing die | 270 |
| Hornady 300 norma improved seating dies | 100 |
| Lapua Hydro Formed Brass | 280 |
| Atlas Rail (there is no Atlas Rail on this rifle. I don't think I purchased this) | 40 |
| Bore Guide Custom Bore Guide | 50 |
| Labor Assemble in 300 norma improved. Everything for labor | 1950 |
| Labor Shipping | 100 |
| Labor CC Fee | 150 |
| Nightforce Ultralight 30mm 6 screw | 190 |
| Nightforce 30mm level cap | 80 |
| Total Build Cost Including Shipping from Iowa to Texas | $6,340 |
SCOPE SPECIFICATIONS:
THIS IS NOT AN ATACR. IF I PREVIOUSLY DESCRIBED AS SUCH. I WAS WRONG. IT IS NOT AN ATACR. IT IS AN NXS
Mfg: Nightforce
Model: NXS - 5.5-22x56
Reticle: MOAR? I don't remember exactly which MOAR Reticle. I have a request with Nightforce support to see if they can identify the exact model by serial number.
Serial No: V07289
Made in Japan
Illumination: No
No Box.
No Papers.
PRICE WITH SCOPE AND RINGS: $5000
PRICE WITHOUT SCOPE AND RINGS $4000
Original receipt and pictures can be found here >>> CLICK HERE FOR PICS
I can provide you some level of purchase security for you by doing one of the following three actions.
- I can take the rifle to gunsmith Dick Cook (he was the head gunsmith at Rays Hardware & Sporting Goods - best Gunshop in Dallas) and have him do a complete assessment of the rifle and send you results via email or phone. $100
- I can take the gun to my FFL of choice and a master gunsmith C2Arms (Curtis Cruson) and have him do a complete assessment of the rifle and send you results via email or phone. $50 (the gun will xfer from me to C2Arms to your FFL and you will receive the rifle there)
- I can take the rifle to your chosen gunsmith in Tarrant County, TX and have them do a complete assessment of the rifle and send you results via email or phone. $100
Keller, TX
Last edited:
