Once Fired Brass Prep

[MattK]

MattKSo please clarify that you remove the expander ball/decapping pin and do not need to use it because you are using a bushing die to set the neck tension/diameter?

ajkellerusmc, yes, that's right. It works for me with turned necks (6.5x55 improved and 300 Norma improved) and un-turned necks (260 Rem and soon 6 mm CM). If I happen to have a neck which is dinged up, then I use neck turning expander mandrel to straighten it, as mentioned by aushunter1 (I think).