OAL to fit magazine?

txsendero

Well-Known Member
Joined
Nov 29, 2007
Messages
466
Location
Humble, Texas
How much shorter should loaded rounds be than the magazine length in order for them to feed properly. (I am loading 95 gr VLD for 243 Win in Rem 700 SPS).
 
Always refer to your loading manuals. Maximum oal length for a magazine in 243 winchester is 2.710. Hornady's manual will tell you they got their best loads at 2.630 oal for 95 - 100gr bullets. Measure your magazine inside length. Usually .005 to .010 under works well. Hope that helps. Capt kurt
 
Last edited:
It really depends on your magazine length and design. With most rifles if you can push a round squarely all the way to the bottom of your magazine without it binding it should work. This is a trial and error situation for you and your individual rifle.
 
Many hunting bullets vary considerably in length. After measuring length of the magazine, I would deduct about .050 - .080 and keep them there to be safe.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top