Clemson575
Well-Known Member
I've never used these barrels and sold my 1911 $200 for each must go free shipping
1911 Barrel, Pre-Fit Kit, Ramped
Sale price: $249.95 Quantity:
Nowlin Barrel, Pre-fit Kit, Ramped
These kits fit frames that have been bridge cut to Nowlin/Wilson. Our Nowlin ramped barrel is desirable for both improved function in some cartridges as well as better case head containment in high pressure loadings. Our barrel is bar stock 416R SS, with a hardness of 40 Rockwell C, electrochemically machined (ECM) to our demanding standards. The bores are an amazing 8 RMS smooth and when air gauged, vary less than 2/10,000". That's why they shoot less than 1/2" @ 25 yards out of our barrel test machine. Less of the case head is exposed as compared to standard non-ramp barrels. Barrel hood, chamber, bottom feet, and top lugs are pre-fit for increased accuracy. Machining of the frame to accept a ramp is required if not already accomplished.
PRE-FIT KIT Includes: Pre-fit Stainless Steel barrel bushing (.581 ID; .701 OD) and .278 link (SS) and oversize/hardened link pin. On the majority of guns, kits simply drop-in. Gunsmith fitting of bushing O.D. to slide I.D. may be required in a few guns.
AVAILABLE FOR: .45APC, 9mm, 9x23mm, .38S, 10mm, 40S&W. Lengths, 6", Government 5", Commander 4.25".
Select length and caliber.
1911 Auto Specs Bore Groove Jacketed Bullets Lead
10mm .3995" .400" .401"
9mm, 9x23 .355" .355"
1911 Barrel, Pre-Fit Kit, Ramped
Sale price: $249.95 Quantity:
Nowlin Barrel, Pre-fit Kit, Ramped
These kits fit frames that have been bridge cut to Nowlin/Wilson. Our Nowlin ramped barrel is desirable for both improved function in some cartridges as well as better case head containment in high pressure loadings. Our barrel is bar stock 416R SS, with a hardness of 40 Rockwell C, electrochemically machined (ECM) to our demanding standards. The bores are an amazing 8 RMS smooth and when air gauged, vary less than 2/10,000". That's why they shoot less than 1/2" @ 25 yards out of our barrel test machine. Less of the case head is exposed as compared to standard non-ramp barrels. Barrel hood, chamber, bottom feet, and top lugs are pre-fit for increased accuracy. Machining of the frame to accept a ramp is required if not already accomplished.
PRE-FIT KIT Includes: Pre-fit Stainless Steel barrel bushing (.581 ID; .701 OD) and .278 link (SS) and oversize/hardened link pin. On the majority of guns, kits simply drop-in. Gunsmith fitting of bushing O.D. to slide I.D. may be required in a few guns.
AVAILABLE FOR: .45APC, 9mm, 9x23mm, .38S, 10mm, 40S&W. Lengths, 6", Government 5", Commander 4.25".
Select length and caliber.
1911 Auto Specs Bore Groove Jacketed Bullets Lead
10mm .3995" .400" .401"
9mm, 9x23 .355" .355"
