Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
No Recoil Lug - What say ye?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 336287" data-attributes="member: 2736"><p>Mark .</p><p>It can be round because if it is large enough and bedded into the stock permanently</p><p>It will transfer recoil just fine.</p><p></p><p>The main thing is to have a very tight fit between the action screw boss and the custom pillar</p><p></p><p>You can make the pillar rectangular but it is more diffacult to build and install but with a</p><p>round pillar it is easy using step drills on the stock to get a well centered pillar using the </p><p>action screw hole in the stock as the pilot hole.</p><p></p><p>You can also make your own factory type luge buy cutting a piece of stainless or carbon steel</p><p>Angle the length of the slot in the stock, cut the part that goes down to fit the depth of the</p><p>slot ,place it in the slot and using the action screw hole mark the center to be drilled for the </p><p>boss on the action for later drilling. once this is done test fit the lug to the boss and if </p><p>everything fits well then you can bed the lug into the stock being careful not to glue the lug </p><p>to the action.</p><p></p><p>To me it's harder to do this than the round pillar.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 336287, member: 2736"] Mark . It can be round because if it is large enough and bedded into the stock permanently It will transfer recoil just fine. The main thing is to have a very tight fit between the action screw boss and the custom pillar You can make the pillar rectangular but it is more diffacult to build and install but with a round pillar it is easy using step drills on the stock to get a well centered pillar using the action screw hole in the stock as the pilot hole. You can also make your own factory type luge buy cutting a piece of stainless or carbon steel Angle the length of the slot in the stock, cut the part that goes down to fit the depth of the slot ,place it in the slot and using the action screw hole mark the center to be drilled for the boss on the action for later drilling. once this is done test fit the lug to the boss and if everything fits well then you can bed the lug into the stock being careful not to glue the lug to the action. To me it's harder to do this than the round pillar. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
No Recoil Lug - What say ye?
Top