Nightforce Scope NP-R1 Retinal Question

shanghi

New Member
Joined
Aug 10, 2010
Messages
3
Location
Bulahdelah, Australia
Hi Everybody
I have just bought a Nightforce 5.5-22x50 Scope with NP-R1 Retinals and was hopeing somebody could please tell me which retinal position to use for my 100 yard zero, the very top one in the scope on the vertical or the centre cross bar in the middle with the windage marks?
Cheers
John.:)
 
I understand, I would zero on the cross in the middle. Then reset your elevation and windage knobs to zero and lock them down. Then after working out your drops you can simply dial up the needed elevation and use a zero hold for the shot. To correct for wind you have the option of using the reticle for hold or do as I do and dial it too for a dead center hold. Good choice, the NP-R1 is myfavorite NF reticle.

Jeff
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top