night force rings?

[yzm19]

hello
i was wanting to know how to pickout the correct ring heigth. im going to use a badger 20moa base and a leopold with a 40mm objective.

 

[CS T]

You could go with the NF low 0.885" or you can even go lower with the Badger Standard 0.823". I use the 0.823" MAX50 from Badger for my Leupold 40mm and it is on a 20moa base also.

Mike @ CSGW

 

[yzm19]

great thanks for the help

 

[jwp475]

Seekins also make excellent rings and bases


Ring height is measured from the top of the rail to centerline of scope tube




Tube Diameter Low Medium Med high High
*1 inch 0.75" n/a n/a n/a
30mm 0.82" 0.87" 0.92" 0.97"
34mm 0.92" n/a n/a 0.97"
35mm 0.95" n/a n/a 1.00"


Rings

 

[uncleB]

hello
i was wanting to know how to pickout the correct ring heigth. im going to use a badger 20moa base and a leopold with a 40mm objective.

Dont know why you would want to use Badger base and NF rings ???? get a matched set 20 MOA base and rings from Ken Farrell. you did not mention action MFG or barrel diameter but if you call Ken or Dixie at 660-438-9456 they can help you out.
UB

 

[yzm19]

i have a leupold vx-iii tac. with 40mm lens. i was putting it on a remington 700 .308 varmit special with the stock barrell. i was wanting the nightforce rings so i could use the defenseive edge nightforce cap with the level and angle indicator on it.