Newbie,270 wby load data 165 matrix

[cblackwell]

Hello all, I am very very new to reloading and hoped some LHR members could help me find a good starting point to load the 165gr .277 matrix pill in my 270 Roy with the long weatherby free bore. Components on hand are once fired weatherby brass, federal 215m primers and H1000 powder with redding 3 die set. Any information would be most helpful. thanks to all in advance!!

 

[cblackwell]

TTT for some help.

 

[FEENIX]

Not Wby but AI but check out #10 post on http://www.longrangehunting.com/forums/f22/my-budget-270-ai-97745/index2.html ... it should be a safe starting point for you.

Hopefully, others with the same set up as yours will chime in.

Good luck!

Ed

 

[cblackwell]

Feenix thanks for the reply. I am hopeing for some others to chime in as well for some more info.

 

[10point]

I shoot a 270wsm with 67gr of n570 federal 215m. Seated at 2.840 3030f/sec and 1/3moa at 100yds 3 bullets. Want to shoot at 200/300/400/500yds this weekend for confirmation.

 

[cblackwell]

btt for some more info. Thanks

 

[mrultramag]

I don't know much about the Matrix or how long the bearing surface is. That said I think there is data for 160 partition. Back off the starting load a grain or two should put you in the ballpark to get started then work up from there. just a thought.

 

[FEENIX]

Try contacting poster #7 on this thread >>> Weatherby Nation

Good luck!

Ed

 

[Bootag]

This doesn't have much to do with 270 but I have a 308 win and the only bullets I could get we're 150gr sst ...anyone know a good recipe for these light loads

 

[cblackwell]

bootag... I am very new to reloading but... i have the hornady reloading manual, what powder or powders do you have and i will get you the info from this manual. Hope this will help you out.