New Terminus - Zeus 6.5cm

LongBomber

Well-Known Member
Joined
Dec 27, 2008
Messages
868
Location
Fernie BC, Canada
Got one of Joel's Zeus actions, had International barrels spin up a 8 twist 6.5cm m24 contour barrel. TT diamond, J-Allen stock, 419 brake. Been dragging my feet on ordering up a new scope, so i borrowed a proven Bushnell tac off another rifle to make the first outing. I basically go the barreled action back in the mail, out on the trigger, dropped it in the stock dropped on the scope and grabbed some loads from my other 6.5cm. Just confirmed they weren't seated into the lands and headed for the range for some break in.

CD4D2CC0-04B7-44E0-9D4B-ACC98E3546AF.jpeg


I did a one shot-clean for the first 5, shot 5 of a 140rdf load, then shot two three shot groups with the 143eld/41.4gr 4350 developed in my other 6.5.
First 3 shots with 143's, shots 11-13 from rifle.
2A3134C6-32B2-46FC-9C5E-70413275FDCF.png


Couple clicks up to get close to zero'd. 143's. Shots 14-16.
4E64CABA-FB7A-4CF3-AD96-50F64C11A316.png


Need to do some load testing and stretch her out a bit, but so far its looking pretty promising!
 
Thanks for the kind words LongBomber, and glad you're happy with the Zeus. Looks like you put a good combination together, and your load development time should be short.
Thanks for your business!
 
The terminus actions are great aren't they?! Smoothest bolt throw out of anything I've been around in my opinion. The Helios I run has been flawless. I've had my 25sst build in hand for 2 weeks but no bolt. Still waiting for it to get re-coated and delivered back to me. Having the beautiful rifle just sitting there and unable to shoot it has been torture!
 
The action is def well done, tolerance's are good, feeding/extraction/ejection flawless and timing with a tt diamond is spot on. DLC is nice and consistent. I wasn't sure about going with Internaltional barrels, as they are pretty new. But after talking to the guys there a bit I went for their barrel. Super happy with both the action and the barrel.

Couple pics from load development. First pic is seating depth testing at 100y, 2nd is powder testing at 200y. Pretty solid accuracy, just need to stretch it out a bit now.

541E2DDF-7EA8-4047-8319-1F120AC91439.png
5B52C2CD-AD84-4207-94C0-1ED4B2ED9BE6.png
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top