New Berger 25cal 135gn LRHT

Got a load developed for my 2506 and the 135 bergers. Im running them at 3075fps with great accuracy. I have yet to find the top end of h4831sc but im guessing pressure will come on around 3175-3200fps. I shot the 117gr Cayuga at 3400fps with amazing accuracy with rl26. Im guessing around 3200-3275fps for the 135gr bergers.
 
I've shot about 100 of them from a 25 CM and ended up with a mild 2800 fps load using N565. That is a full but non-compressed load. Can get quite a bit more velocity but this is a PRS load where recoil and brass life is a priority. I was pleased that I was able to achieve great accuracy at a lower velocity vs the 131 BJ. I had to push the 131 closer to 3000 fps with RL26 for best accuracy. Berger's BC data had it spot-on at 1200 yards after sighting-in at 200 and gathering velocity data. Looks like another hybrid winner
 
I'll for sure get to atleast shoot 1 animal with the 2506 and the 135 berger lol still have an elk and a deer tag coming.
 

Attachments

  • Snapchat-2145521939.jpg
    Snapchat-2145521939.jpg
    280.8 KB · Views: 57
In my 26" carbon barrel 25 creed, the 135 showed pressure signs about 40fps sooner than the 131s with RL26. The Berger has a fair bit more bearing surface. 45.0-45.3 grain has a very nice node going 2900 fps. There's another node @ 2965 but it's pretty warm, getting very light ejector marks there.
 
In my 26" carbon barrel 25 creed, the 135 showed pressure signs about 40fps sooner than the 131s with RL26. The Berger has a fair bit more bearing surface. 45.0-45.3 grain has a very nice node going 2900 fps. There's another node @ 2965 but it's pretty warm, getting very light ejector marks there.
With the numbers of the 131BJ, 2900 is outstanding in a 25 CM
 
Shooting them in my 25SST @ a very mild 3127fps right now. Pronghorn season starts in 9 days....
Are you opening up the tips? Sorry if I missed you already mention that. I have some #59 wire bits and I just drilled a couple out..never tried it before and wondering what your process is like. Some of mine end up straight, some are off center and exaggerate the already inconsistent tip.
 
Are you opening up the tips? Sorry if I missed you already mention that. I have some #59 wire bits and I just drilled a couple out..never tried it before and wondering what your process is like. Some of mine end up straight, some are off center and exaggerate the already inconsistent tip.
I do. #60 wire bit. I have some #72 bits ordered.
 
Top