Need help unkown barrel threads

[TriggerTime426]

I'm looking at a barrel, the guy doesn't no what it came off of. He said it's a 1 x 18 tpi possibly metric not sure what 18 tpi would be

 

[jd5521]

Stolle - 1"-1/16 x18 tpi with 30 degree cone
Bat -- 1"-1/16 x 18 tpi with 25 degree cone
Stiller --1"-1/16 x 18 tpi with 30 degree cone and some with 14 degree cone
Farley-- 1"-1/16 x 16 tpi with 30 degree cone
Winchester - 1" x16 tpi flat breech
Ruger ---- 1" x 16 tpi flat breech
Nesika-----1"-16 x 18 tpi 30 degree cone
Hall ------- 1" x 16 tpi 25 degree cone
Howa -----1".022 x 1.5 mm- flat breech
Browning A-bolt -- .922 x 20 tpi flat breech
and some have .996 x 32 tpi flat breech
AMT-- 1"-1/16 X 16 TPI with 30 degree cone
Wichita---1"x16 tpi with flat breech
Sherman--1"x14 tpi with double 30/45 degree cone

 

[TriggerTime426]

Thanks so based on your list it's proly a remington aftermarket blueprint with 18 tpi instead of 16 tpi....the reason I'm asking is I have a 700 la nd didn't no if I could get it to work. Here's the breech face

 

[jd5521]

Thanks so based on your list it's proly a remington aftermarket blueprint with 18 tpi instead of 16 tpi....the reason I'm asking is I have a 700 la nd didn't no if I could get it to work. Here's the breech face

Only if your action threads have been opened up to fit normal Rem tenon is 1 1/16-16

 

[TriggerTime426]

Would that 1 x 18 tpi be able to be turned on a lathe to rem factory fairly easily?

 

[jd5521]

Would that 1 x 18 tpi be able to be turned on a lathe to rem factory fairly easily?

I don't think so but easiest is to contact a gunsmith and ask. If anything you may need to true your action to open it up a bit. I could be wrong here though I'm not a gunsmith.

 

[Danny1788]

LRI opens up Rem 700 threads and then Changes them to 18tpi. But a 1" tenon won't work with a Remington 700. They start larger from the factory at 1.0625" x 16tpi
What is the tenon length?

 

[TriggerTime426]

Not sure he didn't say...my plan if I bought it was to put more threads on the tenon and use a savage nut system or remage to headspace and install

 

[Danny1788]

Not sure he didn't say...my plan if I bought it was to put more threads on the tenon and use a savage nut system or remage to headspace and install

you would have to cut off the old threads and rechamber to make it work with a Remington 700 action. Unless the diameter is larger then 1"

 

[Pdvdh]

My BAT actions are 1 1/8" x 16tpi

As in 1.125" x 16tpi

 

[TriggerTime426]

He said the diameter was 1.045

 

[Lenny Foffa]

Didn't the Older Mausers snd Interarms Use s Whitworth thread ??? Just Wondering !!

 

[Wrenches]

Yes! Mausers use 55 degree threads instead of 60 degree.

 

[TriggerTime426]

R u saying it's possibly a mauser thread