N570, RL26, RL33 for 195grn Berger?

Popapi

Well-Known Member
Joined
May 3, 2006
Messages
1,051
Location
Oklahoma City Ok
Which powder and why? My STW shoots high .2s to mid .3s consistant with RL26 at or around 3020fps with 28" Proof. A good friend told me that RL26 was trash. I do have 5lb of N570 and a 1lb of RL33. What do you guys use with good results wit the 195. My group's have never been shot lower than 80 degrees being this rifle was just built. All shooting has been achieved at over 80 degrees. Wondering would I have a shift negative in performance at lower temperatures. Thanks in advance.
 
Last edited:
rl26 availability is trash... The powder has seemed just fine to me the bit I've worked with it. Shoot it yourself to see on the temp swing issue, but I use rl25 in my 7stw (s) and have for 15 years with no issues.
 
I would suggest an actual test.... I realize that requires getting to the altitude and temperature in question. Unless you know the critics are very good at analyzing a situation, let actual data speak and ignore the armchair experts
 
rl26 availability is trash... The powder has seemed just fine to me the bit I've worked with it. Shoot it yourself to see on the temp swing issue, but I use rl25 in my 7stw (s) and have for 15 years with no issues.
RL26 haven't been a problem acquiring for me. If I run out I'll try the RL25....thanks for chiming in sir!
 
[/QUOTE]
Start around 76 grains and work up to 80 to 81 My best was at 78 pressure at 81 for me



jjw
ND
jjw 78.5 shot .1 for me thanks for the data guy!
 

Attachments

  • 20190901_131735.jpg
    20190901_131735.jpg
    876.9 KB · Views: 143
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top