My New 300PRC

Troutslayer2

Well-Known Member
Joined
May 28, 2010
Messages
755
After accumulating most of my materials over the course of a year or so, I finally got around to having her put together. Work done by Snowy Mountain Rifles in Hamilton, MT.

300PRC
Defiance nitrided
TT Diamond
Manners EH1
Proof 26" 1:9.3"

I have shot 49 rounds in load development across a huge range of charges, then a huge range of seating depth. The WORST 5 shot group I shot in all of it was 3/4 MOA!

2BDE594B-0231-419C-87C7-2E7C80F24A7A.jpeg



5 shot group.
Berger 215/RL26/ADG Brass 2927FPS
9CB27456-217E-4E3D-9FFF-32316C9F63BC.jpeg
 
I completed a very similar set up. I really like the rl 26 that you shot and the n570.
h1000 for me produced the best SD but the rl 26 end n570 produced the best accuracy. N570 edgeout rl 26
due to speed. I have yet to find pressure signs with n570 but stopped at 2950.

very nice set up you have. Should be a killer.

what reamer did you go with. standard or custom
 
300 PRC, 80 yards on the run...Texas heart shot, bullet (222 ELD-X) travelled 7 feet through the elk and exited the front of her neck....no meat was wasted and she dropped like a ton of bricks, dead before the report of the gun going off!
 

Attachments

  • 7183883B-33B3-4575-839C-986B984CE321.jpeg
    7183883B-33B3-4575-839C-986B984CE321.jpeg
    1.2 MB · Views: 208
  • CF2BA4F6-5B1D-4720-817E-E52B0B512699.jpeg
    CF2BA4F6-5B1D-4720-817E-E52B0B512699.jpeg
    1.4 MB · Views: 201
Those are exactly the 2 I was trying to compare. Thanks for the insight. I'm pretty sure I'm going to try the March.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top