My 338 Sherman Shortmag

[UCzO___]

Which bushing is recommended for the Hornady die?

 

[Ross1147]

I’m using .363 in mine. I also have .362 but haven’t tried it yet.

 

[ruby76]

Which bushing is recommended for the Hornady die?

Depends on brand of brass, if you turn necks, and how much neck tension you want. I started with a 262 and ended up turning my necks so I’m using a 260 now with ADG brass.

 

[UCzO___]

No neck turning, ADG brass, .002" neck tension is my go to on my 7SS.

 

[slv hunter]

I’m using .363 in mine. I also have .362 but haven’t tried it yet.

I'm using 0.363 as well

 

[UCzO___]

The Load Data shows a 235 Hammer at a COAL of 3.235". Does the standard reamer allow for such length or is this a special cut? My 7SS with an extra 0.050" of freebore only gets 195 EOL's out to 3.020".

 

[ruby76]

My 338SS is dialled in with Barnes 210 ttsx, H4350 at 2835.

 

[elkaholic]

Still Hammers

 

[tim_w]

@ruby76 , Yes sir that combo is cutting cloverleafs! Nice hunting load that is good for anything in NA.

 

[ruby76]

@ruby76 , Yes sir that combo is cutting cloverleafs! Nice hunting load that is good for anything in NA.

Going for elk next week, in grizzly country so glad it’s a hammer. My hunting buddy is already in the area and seen two grizz so far. Much handier setup now with the 22” barrel

 

[elkaholic]

Sweet! Best of luck!

 

[WiscGunner]

Going for elk next week, in grizzly country so glad it’s a hammer. My hunting buddy is already in the area and seen two grizz so far. Much handier setup now with the 22” barrel

View attachment 393115

2835fps with a 22” barrel?

 

[Marky_mark]

2835fps with a 22” barrel?

You can push them faster than 2800 with varget
Brass life becomes the issue

 

[ruby76]

2835fps with a 22” barrel?

Yes. No heavy lift or swipes at all.