mounts

[beanur]

Quick question I see some of the tactical mounts like 30 mm Vortex have Allen screws on the side versus one nut on the side. is more preference is one better than the other.gun)

 

[varmintH8R]

I would say it is a matter of preference. Torque them properly and thread-lock and you'll be fine either way.

 

[D.ID]

I would say it is a matter of preference. Torque them properly and thread-lock and you'll be fine either way.

+1.....Agreed. As a preference I prefer a single heavy duty nut over the allen head.

 

[varmintH8R]

+1.....Agreed. As a preference I prefer a single heavy duty nut over the allen head.

That is my preference as well. For scope mounts. I find it less endearing in a vice president . . .

 

[D.ID]

That is my preference as well. For scope mounts. I find it less endearing in a vice president . . .

+1 Amen.

 

[beanur]

would u trust the higher end Burris Tacticals or should i wait and get the Vortex / Seekins gun)

 

[varmintH8R]

I had another LRHer recommend TPS rings so I got a set. VERY impressed with the quality.

 

[sp6x6]

the nut can sometimes hang on scabbard. I run both types. I like the Seeking and I have NFand mark 4 and burris

 

[sp6x6]

the nut can sometimes hang on scabbard. I run both types. I like the Seeking and I have NFand mark 4 and burris might have a set of new burris make you deal on

 

[beanur]

I was looking at the TPS nice mounts whats better steel or Aluim

 

[porkchop401]

I am e big fan of steel (NF Burris) but that being said I have had some heavy duty burris tactical aluminum rings that stood up well!

 

[beanur]

Thanks for your help went through WEBYSHOP.COM got a pair of the Med. Vortex mounts one pair left...gun)

 

[beanur]

got scope mounts in was told to get medium hieght placed scope 4x16x50 vortex pst.. I have about a 1/4 inch gap from the bottom of scope to barrel is this to high should I have gone with low profile they do set on a 20 moa base

 

[beanur]

Contacted Vortex they took care of the problem. As soon as they recived the email