SOLD/EXPIRED Modified Seekins Havak PH2 chambered in 6.5SS for sale

[PatriotHenry]

Seekins Havak PH2 chambered in 6.5 Sherman Short. rifle started out as a 6.5PRC. My meticulous Smith re-chambered to 6.5SS for me. Round count is 592 on original Seekins 24" 1-8 twist barrel.

Havak PH2

Havak PH2 With its newly designed, lightweight carbon composite stock and hand-bedded barreled action, this rifle is able to handle mother nature's extreme conditions providing the hunter with repeatable accuracy and Seekins' unparalleled reliability.

seekinsprecision.com

Barrel is threaded 5/8X24.
Timney hunter trigger set to 1.75lb.
Grayboe Phoenix stock in multi cam camo. I sent my bottom metal to Grayboe and they made this custom for me to fit the long COAL Seekins bottom metal. I also got extra spacers for LOP (7 total) and it has 2 different recoil pads.
Custom ceracote on action and barrel by Snake River Cerakote.
Factory stock.
2 CF 3.14 COAL mags.
Hornady Match Grade FL bushing dies.
Custom PMA rod guide.
SAC 2 rd holder.
Modified case for Hornady OAL tool.
ADG Brass total of 272 pieces.
Once fired 6.5SS HS annealed, primed with FedGM215M's ready to load, 46 primed 4 not (50 total). When I bought the brass from Rich Sherman he would only sell me 50 pieces w/6.5 SS HS. The remainder is 300SS HS.
10 new ready to load primed w/GM215M's necked down to 6.5, 300SS HS.
62 pieces once fired 300SS HS, 61 primed w/GM215M's, one not primed-ready to load.
72 pieces twice fired 300SS HS nothing done.
28 1x pieces 300SS HS loaded with 124gr Hammer Hunters. (If potential buyer is not local, I will pull these down.)
All the RTL brass has been annealed.
I can provide targets and load data on request and or more pictures.
Rifle is 1/2 MOA if I do my part.
(Bi-pod not included)

Asking $2,500 shipped to your FFL for everything. I am located in Pocatello, ID. I will consider traveling up to 100 miles from my location.

Thank you,

PH

 

[PatriotHenry]

Seekins Havak PH2 chambered in 6.5SS. rifle started out as a 6.5PRC. My meticulous Smith re-chambered to 6.5SS for me. Round count is 592 on original barrel.
Grayboe Phoenix stock in multi cam camo. I sent my bottom metal to Grayboe and they made this custom for me to fit the long COAL Seekins bottom metal. I also got extra spacers for LOP (7 total) and it has 2 different recoil pads.
Custom ceracote on action and barrel by Snake River Cerakote.
Factory stock.
2 CF 3.14 COAL mags.
Hornady Match Grade FL bushing dies.
Custom PMA rod guide.
SAC 2 rd holder.
Modified case for Hornady OAL tool.
ADG Brass total of 272 pieces.
Once fired 6.5SS HS annealed, primed with FedGM215M's ready to load, 46 primed 4 not (50 total). When I bought the brass from Rich Sherman he would only sell me 50 pieces w/6.5 SS HS. The remainder is 300SS HS.
10 new ready to load primed w/GM215M's necked down to 6.5, 300SS HS.
62 pieces once fired 300SS HS, 61 primed w/GM215M's, one not primed-ready to load.
72 pieces twice fired 300SS HS nothing done.
28 1x pieces 300SS HS loaded with 124gr Hammer Hunters. (If potential buyer is not local, I will pull these down.)
All the RTL brass has been annealed.
I can provide targets and load data on request and or more pictures.
Rifle is 1/2 MOA if I do my part.
(Bi-pod not included)

Asking $2,850 shipped to your FFL for everything. I am located in Pocatello, ID. I will consider traveling up to 100 miles from my location.

Thank you,

PH

Bump

 

[drtony]

Is the barrel the seekins ph2 contour?

 

[PatriotHenry]

Is the barrel the seekins ph2 contour?

Yes. It is the Seekins original 24" 6.5 PRC Barrel re-chambered to 6.5 Sherman Short.

 

[PatriotHenry]

Seekins Havak PH2 chambered in 6.5 Sherman Short. rifle started out as a 6.5PRC. My meticulous Smith re-chambered to 6.5SS for me. Round count is 592 on original barrel.
Grayboe Phoenix stock in multi cam camo. I sent my bottom metal to Grayboe and they made this custom for me to fit the long COAL Seekins bottom metal. I also got extra spacers for LOP (7 total) and it has 2 different recoil pads.
Custom ceracote on action and barrel by Snake River Cerakote.
Factory stock.
2 CF 3.14 COAL mags.
Hornady Match Grade FL bushing dies.
Custom PMA rod guide.
SAC 2 rd holder.
Modified case for Hornady OAL tool.
ADG Brass total of 272 pieces.
Once fired 6.5SS HS annealed, primed with FedGM215M's ready to load, 46 primed 4 not (50 total). When I bought the brass from Rich Sherman he would only sell me 50 pieces w/6.5 SS HS. The remainder is 300SS HS.
10 new ready to load primed w/GM215M's necked down to 6.5, 300SS HS.
62 pieces once fired 300SS HS, 61 primed w/GM215M's, one not primed-ready to load.
72 pieces twice fired 300SS HS nothing done.
28 1x pieces 300SS HS loaded with 124gr Hammer Hunters. (If potential buyer is not local, I will pull these down.)
All the RTL brass has been annealed.
I can provide targets and load data on request and or more pictures.
Rifle is 1/2 MOA if I do my part.
(Bi-pod not included)

Asking $2,500 shipped to your FFL for everything. I am located in Pocatello, ID. I will consider traveling up to 100 miles from my location.

Thank you,

PH

Bump and REDUCED TO $2,500

 

[matt0311]

Any pics?

 

[matt0311]

NM. They didn't come through at first but just popped up

 

[PatriotHenry]

NM. They didn't come through at first but just popped up

I can provide more if needed