Meopta zd 6-24x56 rd zeroing problem

Larserickaxel

Member
Joined
Feb 22, 2020
Messages
7
Location
Finland
Hi all,

im new with rifles and scopes thats why dum questions.

i bought couple days ago meopta zd 6-24x56 and i have "shot it in".

thing that is bothering me is that 0 is actually 2 in elevation scale or what it is called.

hope some1 could give me a advice.
Thanks upfront
 

Attachments

  • FD1D0FBC-2D4B-4809-B251-F3EE52F218FF.jpeg
    FD1D0FBC-2D4B-4809-B251-F3EE52F218FF.jpeg
    1 MB · Views: 293
  • 1F97C16C-F7EC-4CAE-87E4-C4694001B376.jpeg
    1F97C16C-F7EC-4CAE-87E4-C4694001B376.jpeg
    1.1 MB · Views: 256
The numbers 1 and 2 etc indicate how many full rotations you are up from absolute zero, this is very normal for this scope and a lot of similar scopes. Your first photo shows that you have the 0 inline with the vertical line which is correct now that you have your rifle sighted in and that is what is meant when the instructions mention "resettable turrets".
You can not have it set to 0-0 as your bullets would be hitting the target very low at what ever range it is sighted in at.
I hope that helps.
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top