OKbow87
Well-Known Member
Mcmillan adjustable cheek and length of pull a5 in surgeons coyote marble: 70% med tan, 10% dark grey, 10% yellow, 10% white.
Inletted for a surgeon rsr action, surgeon bottom metal, and krieger #10 mtu.
Action and bottom metal bedded by Jon Beanland.
Two flush cups on the left side and one stud up front for a bipod.
$675 shipped... obo
I have 4 .25" spacers and 1 .5" spacer for the stock. I believe those are all the original ones. Stock has been hunted with, but only has a few pinhead size nicks in the gelcoat which I can not tell if they were there from the factory, or if it did it. There is some light rust on the two cheek piece thumb screws and the two screws in the top of the check piece that hold the hardware in.
Inletted for a surgeon rsr action, surgeon bottom metal, and krieger #10 mtu.
Action and bottom metal bedded by Jon Beanland.
Two flush cups on the left side and one stud up front for a bipod.
$675 shipped... obo
I have 4 .25" spacers and 1 .5" spacer for the stock. I believe those are all the original ones. Stock has been hunted with, but only has a few pinhead size nicks in the gelcoat which I can not tell if they were there from the factory, or if it did it. There is some light rust on the two cheek piece thumb screws and the two screws in the top of the check piece that hold the hardware in.
