SOLD/EXPIRED Manson 28 Nosler Reamer

[cjuve]

Like the title says Manson 28 Nosler removable pilot reamer for sale with 26 nosler go gauge, .2755 and .2765 bushings. I don't remember the exact free-bore .280 sounds right but could verify, set up for 195 Bergers
.318 neck.
$200 for just the reamer
$30 for the rest
Or whole package for $220
I will take care of shipping.

I also have a fluted 8.5 twist Brux #15 .284 barrel that is for sale for $350 6 straight flutes,
30" finish.

Would also be interested in trades let me know what you have

 

[Predator 22]

Do you have the reamer print?

 

[cjuve]

Do you have the reamer print?

It's at my office, so I won't be going in until tomorrow. What do you want to know about it?

 

[Predator 22]

I would like to compare it to a print I have for the freebore and lead angle.

 

[cjuve]

I will be at the office tomorrow and see if I can find it,if not I will call Manson and see if I can get a copy. Looking back at a couple of other posts the freebore is .280 and the lead would be 1 degree 30 minutes

 

[Left Hand Dave]

I will be at the office tomorrow and see if I can find it,if not I will call Manson and see if I can get a copy. Looking back at a couple of other posts the freebore is .280 and the lead would be 1 degree 30 minutes

Do you have any Idea what that makes the OAL of the loaded round? Will it fit in a 700 long action factory box?

 

[cjuve]

Do you have any Idea what that makes the OAL of the loaded round? Will it fit in a 700 long action factory box?

Appromixately 3.73 when your about .015 off, so I put a wyatts in extended box in mine. Not really a big deal if you are already pulling the gun apart, Remington 700 LA needs a couple passes with a mill and a little work on the bolt stops. My smith charges me about $100 for installation.

 

[kfreeze]

I'll take that barrel.

 

[cjuve]

Barrel SPF

 

[kfreeze]

If it doesnt work out let me know. I sent you a pm.

 

[cjuve]

It is SPF to you...
I will reply to your PM

If it doesnt work out let me know. I sent you a pm.

 

[cjuve]

I would like to compare it to a print I have for the freebore and lead angle.

I had to call Manson this morning to get a copy of the print and their computers were down so long story short I am still waiting on the print from Manson.

 

[cjuve]

Reamer print attached

 

[kfreeze]

Reamer and go gauge sold per pm. Thanks!