Manners MCS-T4 Stock Savage SA

Elkbelter

Well-Known Member
Joined
Mar 8, 2015
Messages
2,170
Location
Upstate NY
Excellent condition Manners T4.
Model 10 action-but pretty sure fit most Savage Short Actions.
Has an internal magazine(clip for a 308) glass bedded inside instead of a box mag & follower--supposedly feeds better.
Trigger guard with 3 screws.
Upgrade that 1/4" shootin' Savage to a Manners !
$490

20210718_111133.jpg20210718_110958.jpg20210718_110940.jpg
 

Roughrice

Well-Known Member
Joined
May 5, 2021
Messages
364
Location
Louisiana
Looks like a top bolt release inlet. Bottom bolt release configuration won't fit in this stock without some work... correct?
 

Elkbelter

Well-Known Member
Joined
Mar 8, 2015
Messages
2,170
Location
Upstate NY
Looks like a top bolt release inlet. Bottom bolt release configuration won't fit in this stock without some work... correct?

I don't know? Here is the Barreled action that was fitted to this stock.

1626657440003.png
 

grouse

Well-Known Member
LRH Team Member
Joined
Oct 15, 2010
Messages
3,234
Location
Outside
I’ve fit many bottom bolt release actions into top release stocks. No issues. Just swap trigger guards. Trigger guard may stick out a little
 

Roughrice

Well-Known Member
Joined
May 5, 2021
Messages
364
Location
Louisiana
Won't I have to dremel out space for the bottom button? Or will I have to use a small screwdriver to depress the release lever?
 

Roughrice

Well-Known Member
Joined
May 5, 2021
Messages
364
Location
Louisiana
Won't I have to dremel out space for the bottom button? Or will I have to use a small screwdriver to depress the release lever?
Ok... To clear up my question ... Would I still be able to reach the bolt release lever up inside the trigger house with a small screwdriver?
 

Nathan gravitt

Well-Known Member
Joined
Jun 10, 2020
Messages
398
Location
Virginia
Ok... To clear up my question ... Would I still be able to reach the bolt release lever up inside the trigger house with a small screwdriver?
If the trigger guard pictured is your trigger guard(which it should be for a savage Britton bolt release) then you will simply need to swap out the existing trigger guard for yours and you are ready to shoot.150CCC1A-300B-493C-9D3C-F4C97FB5DD6F.jpeg
 
Top