Manners MCS-T fixed with 20 MOA rail rings height?

CrowsFoot

Well-Known Member
Joined
May 12, 2009
Messages
67
Location
Ok
Wanting to use a 3-18x44 leupy on an impact 737 that has integral rail but I would like to stay away from adjustable comb or stock pack. Anyone running anything similar and how do you like it?
 

Another Casual

Well-Known Member
Joined
Apr 2, 2015
Messages
447
Location
Colorado
I can't speak to your exact combo, but I have two big horn origins running 30mm tubes in seeking low rings. One is in an EH1 and the other is in an EH6, I don't feel the need for an increased comb on either.

Seeking low rings are 0.82 to center
EH1 is 0.35" drop from bore to comb
EH6 is 0.40" drop from bore to comb
MCS-T is 0.38"

Unless our faces are vastly different or the impact has a different height from bore to rail than the origin, I think you'll be happy. Should have no problem with the low rings unless you are running a very large bull barrel.
 

CrowsFoot

Well-Known Member
Joined
May 12, 2009
Messages
67
Location
Ok
I can't speak to your exact combo, but I have two big horn origins running 30mm tubes in seeking low rings. One is in an EH1 and the other is in an EH6, I don't feel the need for an increased comb on either.

Seeking low rings are 0.82 to center
EH1 is 0.35" drop from bore to comb
EH6 is 0.40" drop from bore to comb
MCS-T is 0.38"

Unless our faces are vastly different or the impact has a different height from bore to rail than the origin, I think you'll be happy. Should have no problem with the low rings unless you are running a very large bull barrel.
Thank you for the reply….I had originally intended to use the Hawkins hybrids and build off a 700 action I have had for 25 years that was my first center fire my old man bought me.I’m thinking now I would like to save that action for my son’s first rifle just for sentimental reasons. I know one of the guys that makes the impact actions and Tate is a top shelf guy and I would like to support his company. However, without them making a slick headed receiver yet I’m worried that I wouldn’t be able to get something low enough to suit me.
 

Another Casual

Well-Known Member
Joined
Apr 2, 2015
Messages
447
Location
Colorado
Thank you for the reply….I had originally intended to use the Hawkins hybrids and build off a 700 action I have had for 25 years that was my first center fire my old man bought me.I’m thinking now I would like to save that action for my son’s first rifle just for sentimental reasons. I know one of the guys that makes the impact actions and Tate is a top shelf guy and I would like to support his company. However, without them making a slick headed receiver yet I’m worried that I wouldn’t be able to get something low enough to suit me.

Seekins low rings will do you well as long as they clear the barrel. Any Sporter contour should be fine with a 44mm objective, most target contours too.
 

Recent Posts

Top