Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Making .270 out of 30-06 brass?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 751050" data-attributes="member: 2736"><p>Simply run the 30/06 brass through the standard 270 dies with the expander ball where it </p><p>normally is in the 270 set up. All of the sizing you want is just enough to chamber in your</p><p>270, no more.</p><p></p><p>You will see a small ring at the base of the neck. (This is good) where it is still 30 caliber. this helps set the head space and minimizes brass stretch durring fire forming.</p><p></p><p>There should be no need to turn the necks unless a loaded round is less than .004 larger than the outside </p><p>of a fired round.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 751050, member: 2736"] Simply run the 30/06 brass through the standard 270 dies with the expander ball where it normally is in the 270 set up. All of the sizing you want is just enough to chamber in your 270, no more. You will see a small ring at the base of the neck. (This is good) where it is still 30 caliber. this helps set the head space and minimizes brass stretch durring fire forming. There should be no need to turn the necks unless a loaded round is less than .004 larger than the outside of a fired round. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Making .270 out of 30-06 brass?
Top