Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
M77 controlled feed ?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Hugnot" data-source="post: 2032840" data-attributes="member: 115658"><p>My 10 twist 6mm AI shoots the 87 Vmax at over 3,400 fps and despite the modest ballistic qualities of the 87 Vmax is effective at 600 yards plus on various rodents. I also feeds beautiful. I use either RL16 or H4350 with the 87 VMax. If I wanted to shoot longer bullets I would get a 8 twist. Need to try 4000 MR now that we are in a powder emergency.</p><p></p><p>I did have a 8 twist 6mm AI and used the old 105 Amax and there was plenty of MKII magazine in front of the loaded round. My commercial Mausers will not feed the 6mm AI round, the shoulder of the brass hits the inner collar of the receiver ring but LA M77 MKII's are a perfect fit for the 6mm AI. I discovered this with a dummy round before getting a new barrel. That Mauser is being re-barreled to a 6mm-06.</p></blockquote><p></p>
[QUOTE="Hugnot, post: 2032840, member: 115658"] My 10 twist 6mm AI shoots the 87 Vmax at over 3,400 fps and despite the modest ballistic qualities of the 87 Vmax is effective at 600 yards plus on various rodents. I also feeds beautiful. I use either RL16 or H4350 with the 87 VMax. If I wanted to shoot longer bullets I would get a 8 twist. Need to try 4000 MR now that we are in a powder emergency. I did have a 8 twist 6mm AI and used the old 105 Amax and there was plenty of MKII magazine in front of the loaded round. My commercial Mausers will not feed the 6mm AI round, the shoulder of the brass hits the inner collar of the receiver ring but LA M77 MKII's are a perfect fit for the 6mm AI. I discovered this with a dummy round before getting a new barrel. That Mauser is being re-barreled to a 6mm-06. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
M77 controlled feed ?
Top