Where is best place to buy bottom metal. Also who makes reliable stuff @ a reasonable price ?
700 SA
700 SA
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
M700 Bottom Metal
- Thread starter lacajun
- Start date
Help Support Long Range Hunting Forum
sable tireur
Well-Known Member
- Joined
- Oct 8, 2010
- Messages
- 3,944
I hate to see a post languish away from lack of responses so...
If this question is for the trigger guards with hinged floor plates:
Midway carries a good selection of trigger guards although it seems to be limited to PTG and Remington factory. I have used a couple of hundred of the PTG Oberndorf trigger guards with the hinged floor plate and I've been very happy with these.
You can check Sunnyhill but be sitting down when you see the prices.
There are probably others but you can use a good search engine to locate all of the ones you might be interested in buying.
If you're asking about DBM models and prices, a decent search engine will give you a list to work with.
Regards.
If this question is for the trigger guards with hinged floor plates:
Midway carries a good selection of trigger guards although it seems to be limited to PTG and Remington factory. I have used a couple of hundred of the PTG Oberndorf trigger guards with the hinged floor plate and I've been very happy with these.
You can check Sunnyhill but be sitting down when you see the prices.
There are probably others but you can use a good search engine to locate all of the ones you might be interested in buying.
If you're asking about DBM models and prices, a decent search engine will give you a list to work with.
Regards.
4xforfun
Well-Known Member
i guess my response goes the other way........find a seller who supports this fourm, or at least supports the shooting sports in general. I have no problem paying extra to support our community.
Just my .02,
Tod
Just my .02,
Tod
thanks bud
Capt RB
Well-Known Member
- Joined
- Dec 1, 2014
- Messages
- 1,994
If you want a triggerguard/floorplate vs a det mag set-up. Some of the stock providers sell products. Christen arms has aluminum bottom metal and det mag set ups. Broz showed a trick carbon fiber magazine det mag set up when he compared the 300win to the 30 nosler. I didn't catch the mfg but it was within a few ounces of a floorplate set-up. It also had good length for longer cartridges similar to the wyatt's box setup, Search for that video either here or lro
Found some reasonably priced stuff a PTG pacific tool and gauge. looks like pretty decent stuff.
