Scottf
Well-Known Member
I am trying to find the correct magazine for Push feed M70 L/A for 3006, I have not been able to confirm the correct magazine box identification letters. Either SS or blue will work.
Doesn't he need the 30'06 spacer?Save the cost of the Mag box, drill out the rivets, do it all the time.
This is what I've done but you still need the follower. You also have a short action so the long action box won't fit. I've got a 1340 box(WSM) 3.040 and the follower for it. May have the spring but it's available at MGW. I'll post pictures from work to you/ this thread. I bought them for my PRC build but ended up building on a long action instead. I'll send them to you, if they work, send me $40.00. Outside length is 3.160-FYI.Save the cost of the Mag box, drill out the rivets, do it all the time.
Cycle your bolt and see if it clears your existing box completely. My CRF-LA bolt stop was fine, had to shorten my ejector though-PITA putting it back in place.No, if he is going to seat the bullets out further, he needs the extra space. He may need to get a different follower and spring. The correct spring is the important part. need one with a longer arm to keep it from tipping on the forward end. Also, May need to shorten the bolt stop.
No, if he is going to seat the bullets out further, he needs the extra space. He may need to get a different follower and spring. The correct spring is the important part. need one with a longer arm to keep it from tipping on the forward end. Also, May need to shorten the bolt stop.
I am rebarreling from 220 swift, currently has a .308 mag, to 6.5x55 with long COAL,
looking at VLD type bullet.