• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED LPR 300 REAPER Carbon

Elk Hunter 338

Official LRH Sponsor
Joined
Feb 19, 2010
Messages
4,234
Location
Boss man @Lane Precision Rifles in Idaho
BRAND NEW 300 REAPER ..
BAT LPR HR LIGHT WEIGHT
RIGHT HANDE DIAMOND FLUTED BOLT
ALL LiFE COATED
UM DBM 3 ROUND MAG
MCMILLAN GAMEWARDEN LR SWIRLY CAMO
BIX N' ANDY TAC SPORT PRO X
HELIX 6 CARBON BARREL 8 TW 24"
TI PRO 4 PORT TITANIUM BRAKE
LPR RAIL
FLUSH CUPS LEFT SIDE FRONT AND REAR
8.5 POUNDS EMPTY
FIREFORM LOADS WITH 230 BERGER SHOW EXTREME ACCUARCY ONE HOLE FOR THE LAST 15 I FIRED THROUGH RIFLE @100 YARDS OVER AN HOUR FOR ALL 15 ROUNDS SAME POI
RIFLE COMES WITH 50 FF PIECES OF PETERSON BRASS AND DIES
POTENTIAL LOAD FOUND WITH 245 BERGER AT A CASUAL 3100FPS WITH ROOM TO GO WITH OTHER POWDERS
$6150 PLUS SHIPPING AND INSURANCE FOR IT ALL
20231104_150317.jpg
 
Last edited:
Nice....245 Berger at 3100fps from a 24" with room to go .... that is out running my 300NMI with a 230 Bergers and 26" barrel! Is the 3100fps with H1000?

Do the 245s feed from the UM DBM?

Where would a 338 Reaper with 300gr Bergers and 24" barrel land for comparison?
 
20231127_092828.jpg

@carpassassin the reaper is my version of a 7mm, 300 or 338 Lapua improved
@jensenj71 my 300 NIMP is basically a short fat version capacity wise same as a 300 rum.
My reaper series is a 338 Lapua case case improved to my specs .. a lot of room for da more pew pew
I'm running Retumbo in it now for ***** and giggles, N570 or rl33 would ramp it up even more
I have never done a 338 reaper in 24" personally but i do have a few in the wild and am waiting for reports back .. most are 28-30" and run a 300 at or over 3k and a 225 at 3380fps
 
Last edited:
Do the 245s feed from the UM DBM? Looks like the magazine and the action will support nearly a 4" COAL.

Anything to prevent tips from getting damaged in the magazine or is still a manual feed for best long range performance?
 
Top