Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
looking for adapter from 5/8x28 to 5/8x24
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 1091199" data-attributes="member: 2736"><p>The best way to do this is to cut the 5/8x28 tenon off and re thread to 5/8x24 TPI.</p><p></p><p>You loose 1/2 to 5/8s of an inch but that changes the velocity very little.</p><p></p><p>If the caliber is 223, you can turn the 5/8x28 down to 1/2x28 and get a premade bushing that will convert to a 5/8x24 TPI for about $5.00.</p><p></p><p>You may have to buy a new muzzle brake with 5/8x24 TPI but then you can switch back and forth</p><p>between the two.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 1091199, member: 2736"] The best way to do this is to cut the 5/8x28 tenon off and re thread to 5/8x24 TPI. You loose 1/2 to 5/8s of an inch but that changes the velocity very little. If the caliber is 223, you can turn the 5/8x28 down to 1/2x28 and get a premade bushing that will convert to a 5/8x24 TPI for about $5.00. You may have to buy a new muzzle brake with 5/8x24 TPI but then you can switch back and forth between the two. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
looking for adapter from 5/8x28 to 5/8x24
Top