Load data for 300 PRC

1/2 MOA at 100 yards. 300 PRC TMAR Bolt Action Rifle. 168GR. TTSX Barnes, 82GR. Magnum powder, C.O.A.L @ 3.500 @ around 2950fps (estimate fps).
 

Attachments

  • 300 PRC.jpg
    300 PRC.jpg
    821.8 KB · Views: 462
Factory Bergara b14 hmr 26" barrel
212gr eld-x
Once fired hornady brass
215m primer
80gr IMR 8133
Shooting around 2860fps

I'm still playing with this load but I shot a 5 shot group this past weekend 4 shots measured .345" with a flyer on the 2nd shot.
 

Attachments

  • 90697E31-DCD8-46A8-9F04-5BB6D5876E63.jpeg
    90697E31-DCD8-46A8-9F04-5BB6D5876E63.jpeg
    59.6 KB · Views: 156
N570 82 gr
berger 215
around 2950
ADG brass
Cci 250 mag
very accurate and no pressure signs.
That's a nice load. My 300PRC is on its way back after 5 month hiatus at LRI getting some upgrades done. I've got to try this one out for sure as well as the one above. I just need to score some N570 now. How temp stable is N570?
 
That's a nice load. My 300PRC is on its way back after 5 month hiatus at LRI getting some upgrades done. I've got to try this one out for sure as well as the one above. I just need to score some N570 now. How temp stable is N570?
What research I've done its very good on temp stable. farest I've shoot it is 700 yards with the above load and it was very consistent. 500 yards well below 3 inch group consist.
very happy with turn powder.
I tried h1000 but n570 out shot it.
never tried rl 26

this was on a 25 inch barrel with 10 twist. 4 groove hawk hill.
 

Attachments

  • 497ECDA5-945A-4DAA-A32A-86E3CD341738.jpeg
    497ECDA5-945A-4DAA-A32A-86E3CD341738.jpeg
    28 KB · Views: 211
  • 2AC367F6-93CD-4DCA-9787-FF3F15354E87.jpeg
    2AC367F6-93CD-4DCA-9787-FF3F15354E87.jpeg
    210.7 KB · Views: 204
  • 990EFA01-F19C-420D-8DD7-7BBC645F8614.jpeg
    990EFA01-F19C-420D-8DD7-7BBC645F8614.jpeg
    194.6 KB · Views: 210
80.0 gr H1000
cci 250's
210 Berger VLD's
Hornady Brass
.035" Jump
This load shoots .25-.3 moa at 3005 FPS in the custom rifle I bought from 8andbait in the classifieds.
I think I might be in love with it.....

On another note, I worked up from 74.0 grains and it shot roughly 1.5 moa until 80.0 gr. the difference between 79.0 and 80.0 gr was magical. Not sure why but I am happy with the end result.

Also, the same load with 210 LRAB shot around .5 moa. They were both .035" jump, but the accubond COAL was slightly longer. I can't remember what the COAL or CBTO lengths were off the top of my head.
 
Top