Leupold Freedom AR MRAD Zero Stop Hack

kiwi22250

Member
Joined
Oct 27, 2016
Messages
5
Location
New Zealand
Hi guys just came across a quick hack for the new Leupold Freedom AR 3-9 which in my opinion makes this relatively budget scope a real winner.

After removing the turret for inspection i noticed it has the bottom half of a basic zero stop in there from the factory and the hole drilled in the turret all that was missing is the pin so just filed down a roll pin and boom Zero stop.

With the Scope in MRAD and the zero stop fitted there is 5.5MRAD in the single turn which on a standard caliber will dial out 650M/700Yards.

I have yet to do a tracking test to see how accurate and repeatable the system is. even if it dosnt dial a tru .1 click as long as its repeatable these can be adjusted in most ballistic apps.

IMG_4584.JPG
IMG_4587.JPG
IMG_4588.JPG
IMG_4589.JPG
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top