Let's talk about 2 mile cartridges

Guys are still having trouble with various cases with too thick of sides. The thick sided case have enough brass material to thin up sides and stretch them way out to 4 or
more inches,,And they'd work with proper slow powders, we are working on a 458 HSM experiment, with case holding 400 gr ball powder under the bullet. ED
 
20mm Vulcan is a big case that works ok, without having

the sides made too thick...They have thinner sides

than smaller cases guys are getting that have the sides

made too thick and won't extract easy or work with high pressures.


Here Barnard P Cheytac bolt that would do for our 416 HSM..Ed......

barnpchey.jpg
 
Got guys doing various 416 HEs..

One just built a 416 HE, just been testing it a few days..

And using 168gr of HBMG 475 gr CEB, tested it, in good

conditions, 2 shots at 1800 yards and was within

a 1/4 of minute accuracy...A few shots at shorter ranges

had same accuracy. Ed..
 
More about our 416 HSM from BMG brass, and
our 416 HE & 460 HE from our 585 HE cases
Got reamers for 375 HE, 416 HE and 416 HSM,....

460 HE & 460 HSM are all spec'd, got HE reamer
soon have HSM reamer...Our HSMs have a Wea type
radius on the shoulder..

The fellow that set up our 416 HE in an ELR rifle
and got 1/4 min accuracy,
They got some game out west over 1400 yds..
.Here is the gun they set up.
Using a K&P 34" barrel on a BAT action.....Ed

jacobgun.jpg
 
And have got a 460 HSM figured out, and the impetus for that is some
asking about one and the great line of 458 bullets CEB now has.
It will hold more powder than the 416 HSM.....Ed..
 
The guys that did the super accurate 416 HE did another
416 HE that has an 8" longer 42 inch K&P barrel..

Used a Stiller action and same load with 475 gr bullet, as in
first gun and and gained about 200 fps with good accuracy.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.
And loads they used are not the highest speed loads
the cartridge is capable of....Here is print with specs for
the 416 HE reamer chamber ....Ed....

416heream.jpg
 
More about he guys that did the accurate 416 HE, they did a
416 HE that has an 8" longer 42 inch K&P barrel..

Used longer barrel and the same load with 475 gr bullet, as used
in the first gun and and gained about 200 fps with good accuracy,.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

And loads they used are not the highest speed loads
the cartridge is capable of....Here is picture.......Ed....


jacobgun2.jpg
 
Here is print with chamber reamer specs for the
416 HSM chamber..There are 3 base sizes we have,
depending on actions used. Got reamers for all 3..
Got cases for all of them..
Our cases are public domain, so that is why I post
info and specs. Manson makes reamers I use,,, Ed.
416hsmream.jpg
 
Here is reamer print with chamber reamer specs for
the 460 HSM chamber .Couple guys getting set
to do 38-40 inch heavy 458 target barrels...Ed....
460hsmream.jpg
 
With 40 inch barrel 416 HSM ,475 gr, get 3650, over 13,000 ft lbs muzzle energy.
Got guys getting set to have 38-40 inch 458 barrels made for 460 HSM.Ed..
 
Here is one put together for testing 416 HSM cases with a rebated rim, we made,
to check in intermediate size actions, with the longer, stronger, bolt lugs, Ed..
intertargetp.jpg
 
Here is experimental action for 416 HSM in a heavy
stock....We lengthened port a little, set bolt stop back ,
opened bolt face fit the 416 HSM rebated rim. Ed.
intertarget.jpg

Here is comparison of Montana PH to Pierce action we
modified to use for rebated rim 416 HSM testing..Ed.
intermediates.jpg
 
WE'VE got Pierce X20s actions to use for our 416 and 460 HSM

and working on an intermediate octagon version ,,,Ed
 
Top