Let's see your edge's

stevescg80

Well-Known Member
Joined
Nov 5, 2006
Messages
107
I am in the process of putting an edge together Jim at centershot is building mine and is assembling it as we speak. Would love to see pic's of fellow members rigs.
 
HPIM1301.JPG


HPIM1302.JPG
 
338cannon.jpg


Single shot built on savage 110 action with PAC-NOR 30" straight 3 grove SS barrel. Wotac gen 4 4-14x50 scope. Good shooter. An economic rig at less then 2k with enough brass, bullets, and powder to get good with it.

Love the edge!

BT
 
Last edited:
Well here is mine, I realize I went against the grain with a short barrel (17.75" without the brake), but I did the work myself and in order to fit the big barrel in my small lathe I had to chop it down. I was getting 250 SMK's out at 2850. The barrel is a used Lawton with a Harrels muzzle brake, I picked up from a member here, Savage long action with a SSS recoil lug and trigger, Sightron SII 4.5-14 mildot sidefocus scope, Reamer came from PTG with a .365 neck and the barrel is fitted without the barrel nut. It's got the crummy tupperware stock, but next up will be to replace that with a decent laminated one. had some accuracy issues at first that I attributed to me flinching from the muzzle blast, or the tupperware stock and put it up for a bit, but I just robbed the scope from it, and discovered the front scope base was loose, I'll have to get it out again soon.


Zeb

savage.jpg
 
Mine started as a Savage 112 BVSS 300WM. Here's the current configuration:

Shilen 338 Edge 28"
Defensive Edge brake
SSS recoil lug
SSS Tactical bolt handle
HI Viz recoil pad
Eagle Creek cheek pad
Glass bedded (Devcon 10110)
Near 12 MOA Picatinny rail
Custom heavy duty rings
Nightforce 3.5-15x50mm MLR, ZS, FFP

012.jpg


011.jpg


014-1.jpg
 
I can't wait to get mine these are all great looking rigs I bet that short barrel savage has some muzzle blast lol and down under how long a barrel did you go with?
 
Mine started as a Savage 112 BVSS 300WM. Here's the current configuration:

Shilen 338 Edge 28"
Defensive Edge brake
SSS recoil lug
SSS Tactical bolt handle
HI Viz recoil pad
Eagle Creek cheek pad
Glass bedded (Devcon 10110)
Near 12 MOA Picatinny rail
Custom heavy duty rings
Nightforce 3.5-15x50mm MLR, ZS, FFP

012.jpg


011.jpg


014-1.jpg
Moosetracker, very nice looking wood. What type wood is your stock made from?
 
Here is my 338EDGE.

338edge2-1.jpg


700 Rem Long Action
30in Rock Creek with DE Muzle brake
1-9.4 twist
sako extractor
HS Stock bedded
Harris Bipod
20MOA Rail
NXS 8.5-32x56NPR-1
Wyatt Extended Mag

Shooting 300SMK at 2814fps at 0.06 off land with 92g H1000 250CCI 3.780 OAL
Groups: 0.75in at 200yrds ALL DAY
 
CJ,

That gun has similar loading diet to mine.. 300 smk, 3.775 OAL, cci 250, 92 H 1000, 10 thou off lands ? I like the paint theme too. Did you add the mag box after you originally got it together ? How does it go ?

DUH
 
It's the original Savage 112 BVSS laminated stock.

I prefer the look of solid wood vs laminate but, yours is one of two that I've seen that has me re-thinking my opinion of never going with the laminate look. I like the look, almost like solid wood, very nice. Thanks for sharing.
 
Top