Lapua Palma Brass

jsthntn247

Well-Known Member
Joined
Jan 14, 2009
Messages
887
My F class load is 44.2gr of Varget and a 185 Berger. This load loosens my regular Lapua pockets in 4 reloads. I can't get the rifle to shoot well at lower velocities. Would using Lapua Palma brass help get a few more loads out of brass?
 
My F class load is 44.2gr of Varget and a 185 Berger. This load loosens my regular Lapua pockets in 4 reloads. I can't get the rifle to shoot well at lower velocities. Would using Lapua Palma brass help get a few more loads out of brass?

Which 185 are you using, and what primer?

It quite possibly could, but i dont know if i would go that route. I would probably go through my load work up again and look for a different node and seating depth because switching to the small rifle primer you will probably end up doing this anyways.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top