• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED Kimber 7-08 Ackley PacNor

DHBWA

Well-Known Member
Joined
Jan 14, 2012
Messages
901
Location
SE Washington
Kimber Classic action rebarreled by PacNor before the fire. 22" 1-9TW SS Super Match in factory contour in a Montana stock. Less than 100 rds fired. I worked up a load with 150BT and several powders which shot an inch or sometimes better. I quit there….
Has a Ti long bolt knob.
6lbs 9 oz with NF 3-10 non illuminated.
$1549 shipped w/o scope

3FD78A17-941C-4429-9EB9-A037DB441701.jpeg46766B64-C1A4-4537-A053-5F4A046FC8F0.jpegDAA8BDE4-16F6-4E8B-B447-174191AE785F.jpegCEB724C0-D7D0-4BAF-A634-51E462B32117.jpegE81CE9A2-7A07-4928-B675-71D0169B59A1.jpegE16A28EF-DC3C-4CCD-B5A2-F4C8FDAE973D.jpeg
 
Last edited:
Any idea how it's throated? If a 168/180 might get somewhere near the lands?

Have a Fieldcraft 6.5 CM if that might be of some interest for trades
 
I'll check my notes later but the issue is mag box length. 2.850ish
IIRC it has a good throat considering the max OAL.
 
Took me a second to figure out the picture orientation but yes that looks easy enough. How much do you gain? .050-.060?
 
Indeed this may tangent the thread...

It buys me .125" In total. I don't need that much to get to the lands. But I like having the headroom.

All I did was have a buddy of mine with an end mill dig cut that out.

If I had any sense I'd try to patent this and exploit it, but I doNt need another project...
 
Top