Kelby atlas action scope mounts?

mightyman

Well-Known Member
Joined
Jul 24, 2012
Messages
619
Location
Adel, Georgia
Got a custom 7mm with a Kelby atlas action
Had an extra long action rail and tried it

However the Screws are to small as well as threads?

Does this action take Kelby only rails and screws?
same with rings mounts no rails
Scope coming soon and need to get either rail or rings mounted
Thanks
 
Did the hole locations match up on the rail? Maybe the rail was made for #6 screws and the action is set up for #8 screws?
 
They are going to be 8-40 and you can get them at Brownells. Some Ace hardware stores have a gun screw section. Gun screws are going to be stronger.
Tarey
 
If you call Kelbly's they would probably send you the screws or even the rail they supply with their actions when purchased. I believe you can get the rails in 0 or 20 moa and they are also pinned on the action.

John
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top